Shenzhen Jiaxuntong Computer Technology Co., Ltd.
The Trusted High-End Turnstile Gate&Door Automation Manufacturer With 15 Year Experience!
Add to Cart
Sliding opened turnstiles gate goverment office flap barrier gate for control the vistior
1. Flap Gate specifion
| Description | Parameters |
| Lane Width | 550-570mm |
| IP | IP54 |
| Pass Speed | 25-30 persons/min |
| Power supply | AC220V/110V,50/60Hz |
| Drive Mode | Motor drive |
| Max Power Consumption | 200W |
| Opening time | 0.06S |
| Humidity | ≤90% coagulation free |
| Noise | ≤50dB |
| Service Life | 3,000,000 cycles |
| Outside packing | 145x110x24 cm |
| Working Environment | -20°C~+60°C |
How to test testing
1. The earth wire must be connectied
2. Power on the device with AC110V/220VNotice:the earth must be connected
3. Wait 30 seconds until the device dinishes self-detection.
4. Check the wing opening in both directions,and check the LED.If it works fine,start installation
Driver board feature
Flap barrier drive board,air switch,power supply were included in a stainless box,fixed inside of the housing,box size is:350mm(L)*220(W)*65(H)mm,there are wiring posts on the box for drive board.
1-5 wiring posts for user input(for access control system etc);down end wiring posts for speed gate wing position detection inputs(connected),1-9 wiring posts for IR sensors dection inputs(connected).
Note:10 core cable wiring the master device and slave device synchronization inputs keep them works fine.