Shenzhen Jiaxuntong Computer Technology Co., Ltd.
The Trusted High-End Turnstile Gate&Door Automation Manufacturer With 15 Year Experience!
Add to Cart
Remote control access control swing speed gate 304 stainless with Laser cutting process
Product decrible:
Door will automatically reverse once safety IR detected obstacle or when a small force is detected blocking its motion. This dual detection feature is to prevent injury caused by door hitting people.
EASY INTEGRATION
A push button or access control reader can be used to trigger the swing barrier to open via simple dry contact signal. After delay timer elapsed, swing barrier will automatically close back by itself.
MINIMUM MAINTENANC
Uses brushless DC motor eliminate the need of changing carbon brush thus reducing maintenance work. Key internal parts is treated with anti-rust and anti-septic to ensure long term reliability.
EMERGENCY RECOVERY
During power failure, swing barrier will automatically open for free pass through. This will fast escape in the event of emergency. When the power resume, swing barrier will automatically close back.
Technical :
| Power consumption | 50W | 100W | |
| Housing material | 1.5--2mm, #304 Stainless Steel, Matt finish | ||
| Drive motor | DC brushless motor | ||
| Channel width | 600--1100mm | ||
| Pass speed | 30 persons/min. | ||
| Power supply | AC220V / 110V (optional) | ||
| Input interface | Switch Volume or 12V Level | ||
| Communication interface | RS485 | ||
| Gate open while power off | Yes | ||
| Working temperature | -30°C~+70°C | ||
| Working environments | Indoor | ||
| Relative humidity | ≤95% coagulation free | ||
| MCBF | 1,500,000 cycles | ||
| Warranty | 1 year | ||
